Description
- The Peep Reducer (#753-3) can be used with the Large peep housings (#749-37L, #749-37LH, and #753LH) to reduce the hole size to match the 3/16″ opening found on our smaller standard size Pro Series and Ultra Lite peeps.
- This will allow 1/8″ and smaller original Apertures, Clarifiers, and Verifiers to be installed into the Large housing.
- Use of the Dual Aperture Wrench (#210078) is required to install the Peep Reducer (#753-3) into your Large peep.
- Large Peep and component weights:
- Large Non-hooded Peep – 12.5 grains
- Large Hooded Peep – 15.0 grains
- Large Clarifiers/Verifiers – 5.5 grains
- Peep Reducer (#753-3) – 3.1 grains
- Peep Reducer with 1/8″ Clarifiers/Verifiers inserted- 7.1 grains
- Large Peep Aligner (#PAL) – 15.0 grains
Reviews
There are no reviews yet.